Technical Manual
Glass Push-button II Smart & Push-button Smart 86 [Series .02]
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-
880 • [email protected] • www.mdt.de
40
40
4.4 Button functions
4.4.1 Identical parameter
–
Lock object
The lock object can be activated for grouped buttons as well as for single buttons. If the lock object is
active, a communication object is displayed for the respective button or button pair. Up to 13 lock
objects (12 button fun push-button) can be configured for a push-button. If the blocking
object is assigned a logical "1", the corresponding button is "locked" and can therefore no longer be
switched. A "0" cancels the lock.
Figure 17: Identical parameter
–
Lock object
The following table shows the available communication object:
Number Name/Object Function
Length Usage
6
Lock object
1 Bit
Locks the button function
Table 24: Identical communication object
–
Lock object
4.4.2 Identical parameter
–
Function name
The presentation of a button function is configured identically for all buttons or button pairs. The
function name
is displayed centrally above the respective function and can be set either
permanently ("via text input") or dynamically via communication object.
With the two-button function, the left and right buttons can each be assigned their own label.
Note
: The presentation of the symbols is described under the corresponding button functions.
The following settings are available for this:
ETS-Text
Dynamic range
[Default value]
Comment
Function name
▪
no text
▪
from „Message
-
text“
(14 Byte object 146)
▪
from „Status text 1“
(14 Byte object 147)
▪
from „Status text 2“
(14 Byte object 148)
▪
via text input
▪
dynamic text according to status
value
Sets the data source for the
function name.
Selection "dynamic text
according to status value" only
available for "switch" functions
.
The function name is changed
depending on the telegram
received, e.g. "Present/Absent" can
be signalled.
Text
free Text
[up to 20 bytes allowed]
Input of the function name.
Only available for “Function
name
–
via text input”
Labelling left/right
button
free Text
[up to 6 bytes allowed]
Labelling of left and right button.
Only for two-button function
.
Text for „OFF“ / „ON“
free Text
[up to 9 bytes allowed]
Input of a text.
Only available for “dynamic text
according to status value”
Table 25: Identical Parameter
–
Function name
