Technical Manual
Glass Push-button II Smart & Push-button Smart 86 [Series .02]
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-
880 • [email protected] • www.mdt.de
29
29
4.2.3.3 Messages
The following picture shows the available settings for messages:
Figure 12: Settings
–
Messages
The following table shows the settings for the messages:
ETS-Text
Dynamic range
[Default value]
Comment
Message 1-4 (1 Bit)
▪
not active
▪
active
Activation of message 1-4.
Message 1 (highest priority)
Text
any text
[up to 15 bytes allowed]
Displayed text when the message
is triggered.
Display time
▪
not active
▪
until button is pressed
▪
1 s
–
8 h
Setting how long the message
should be displayed.
Message 5 (14 Byte)
(lowest priority)
▪
not active
▪
active
Activation of the message via the
14-byte object.
Message 5 has the lowest priority
of all messages.
Display time
▪
not active
▪
until button is pressed
▪
1 s
–
8 h
Setting how long the message
should be displayed.
Resetting the message via
object
▪
not active, only keypress
and display time
▪
active, and with value
“
0
”
via
objects “Message
(1-4)
”
Setting when the message should
be taken back.
