eMINI fogger
User Guide, Rev: A/a, April 2020
22 / 28
Symptoms
Probable Causes and Suggested Actions
« STATE = FAIL»
VERIFY THE ERROR MESSAGES
•
Error = HEATER
•
This is a heating timeout, due to a cartridge
heater problem.
•
Restart the fogger and check the heating
status «STATUS
STATE = xx% HEAT». If
the heating value is not progressing, you
have a cartridge problem.
•
Restart the fogger in 115 VAC.
Please contact the Service if this problem
persists.
•
Error = T. HIGH
•
Restart the fogger. This is generally due to
an electronic problem.
Please contact the Service if this problem
persists.
•
Error = T. SAF
•
Restart the fogger. This is generally due to
an electronic or sensor problem.
Please contact the Service if this problem
persists.
•
Error = PCB. HIGH
•
Stop the fogger for few minutes, if it is
possible
•
Try to change the position of the fogger to a
cooler place
Please contact the Service if this problem
persists.
•
Error = WD RESET
•
Restart the fogger.
Please contact the Service if this problem
persists.
Содержание eMINI
Страница 2: ...eMINI fogger User Guide Rev A a April 2020 2 28 Intentionally left blank...
Страница 25: ...eMINI fogger User Guide Rev A a April 2020 25 28 DIMENSIONS...
Страница 27: ...eMINI fogger User Guide Rev A a April 2020 27 28 DECLARATION OF CONFORMITY...
Страница 28: ...eMINI fogger User Guide Rev A a April 2020 28 28 NOTES...
