eMINI fogger
User Guide, Rev: A/a, April 2020
16 / 28
•
ERROR = T. SAF
LAST ERR CODE = 5
This error will occur if abnormal temperature difference between the two sensors of the heating module
is detected.
This is generally due to an electronic or a sensor problem. Shut down the fogger and restart it.
•
ERROR = PCB HIGH
LAST ERR CODE = D
This error will occur when the internal temperature of the fogger is too high.
This may happen if the external temperature is high. Clear out the vents and move the fogger in the
shade. Shut down, wait few minutes and restart the fogger.
•
ERROR = WD RST
LAST ERR CODE = E
This error will occur if the watchdog (software safety) resets the fogger.
This is generally due to software error, an interference or chip problem. Shut down the fogger and
restart it.
Please contact an Authorized Service Center if any problem persists.
Содержание eMINI
Страница 2: ...eMINI fogger User Guide Rev A a April 2020 2 28 Intentionally left blank...
Страница 25: ...eMINI fogger User Guide Rev A a April 2020 25 28 DIMENSIONS...
Страница 27: ...eMINI fogger User Guide Rev A a April 2020 27 28 DECLARATION OF CONFORMITY...
Страница 28: ...eMINI fogger User Guide Rev A a April 2020 28 28 NOTES...