MDG eMINI, Руководство пользователя

Страница: 12 / 28

eMINI fogger
User Guide, Rev: A/a, April 2020 12 / 28
The tree menu architecture is explained below. Items highlighted in blue are state menu (--), and those
highlighted in yellow are control menu ( -- ).
STATUS Status menu
STATE ----
Status State
UNIT OFF - the fogger is off
xx% HEAT - the fogger is heating , but not ready
READY - the fogger is ready to produce fog
FOG ON - the fogger is producing Fog
FAIL - the fogger is off, due to a failure (see diagnostic)
ERROR ---- Error message when State = FAIL (see diagnostic)
TEMP. ---- Temperature status (heating module)
TOO LOW - temperature too low
OK - temperature within specifications ( ready )
TOO HIGH - temperature too high
PCB TEMP ---- Temperature of the board (see Units)
RUN TIME xx.x Total Run Time in decimal hours
FOG TIME xx.x Total Fog Time in decimal hours
LAST ERR yyyyy Code for the Last five (5) errors
See Fail State paragraph
CONTROL Control menu
UNIT ----
Unit
toggle
OFF - the fogger is
off
ON - the fogger is
on
« Normal Mode » PERSONALITY
OUTPUT xxx Fog
Output
, from low (0) to high (255)
« Burst Mode » PERSONALITY
BURST DUR xxx 1/10 sec Burst duration, for 0.5 (0) to 26.0 (255)
FOG xxx
Fog Control
OFF - No output
ON
1
- Fog output
PERSO. xxx Personality toggle
NORMAL - Normal Mode (Variable Output)
BURST - Burst Mode (Very High Output, Short Duration)
1
In Burst Mode, the fogger produces a UNIQUE burst of fog. The user must switch back the
menu to OFF to be able to redo another burst of fog.