background image

Installation, Service and Warranty Policy

IM 422-4 / Page 16 (Rev. 5/99)

One-Year Warranty of Entire Conditioner
AAF–McQuay Incorporated, hereinafter referred to as the “Com-
pany,” warrants to the original owner that each entire Incremental
Comfort Conditioner is free from defects in material and work-
manship. Any part or portion thereof which becomes defective
under normal use during the period of this warranty will be re-
paired or replaced provided the Company’s examination shall
prove to its satisfaction that the part was or became defective
under normal use. This warranty contemplates that first year
maintenance labor was arranged for with the installer or other-
wise at the time the conditioner was purchased or installed. The
Company’s examination shall prove to its satisfaction that the
part was or became defective under normal use. This warranty
contemplates that first year maintenance labor was arranged for
with the installer or otherwise at the time the conditioner was
purchased or installed. The Company’s obligations under this
warranty are limited to: (a) repairing the defective part or (b) fur-
nishing a replacement part provided the defective part is returned
to the factory, transportation charges prepaid. No reimbursement
will be made for expenses incurred in making field adjustments
or replacements unless specifically authorized in writing by the
Company.

This warranty constitutes the buyer’s sole remedy. It is

given in lieu of all other warranties. There is no implied war-
ranty of merchantability or fitness for a particular purpose.
In no event and under no circumstance shall the Company
be liable for incidental or consequential damages, whether
the theory be breach of this or any other warranty, negli-
gence, or strict tort.

No person (including any agent, salesman, dealer or

distributor) has authority to expand the Company’s obligation be-
yond the terms of this express warranty, or to state that the per-
formance of the product is other than that published by the
Company.

One-Year Refrigeration Circuit Warranty
Hermetically sealed motor-compressor assemblies and all
components of refrigeration circuits not readily separable there-
from are warranted to the original owner for one (1) year. Refrig-
erating circuits consist of the motor-compressor assembly,
evaporator coil, condenser coil and interconnecting tubing.
Repairs under this warranty will be made at the Company’s
expense provided that the refrigeration circuit is delivered, without
shipping damage, transportation prepaid to the factory or to a
factory designated repair station, at the Company’s option. This
one-year warranty does not include any other parts of the
equipment such as filters, capacitors, protective devices, or wiring.
The Company is not obligated under this warranty for field labor
such as service for inspection, removing, packing and/or
re-installing the refrigeration circuit, nor for return transportation
charges.

General Conditions
The above warranties are void if the Company’s equipment has
been damaged, misused, subjected to abnormal use or service
or its serial number has been altered, defaced or removed, or
payment for the equipment is in default. The Company is not
responsible for service to correct conditions due to misapplication,
improper installation, inadequate wiring, incorrect voltage condi-
tions or unauthorized opening of the refrigeration circuit, nor for
consequential damages. In case the Company’s equipment is
installed in conjunction with cabinets, grilles, louvers, controls or
other parts manufactured by others, these warranties shall apply
only to the Company’s manufactured portion of the equipment.
The conditions of the warranty plan are effective for eighteen
(18) months from date of factor y shipment. The
Company reserves the right to make a handling and inspection
charge in the case  of parts or equipment improperly returned as
defective and/or as being in warranty.

AAF–McQuay Incorporated

4900 Technology Park Boulevard, Auburn, New York 13021-9030 USA (315) 253-2771

Printed on recycled paper containing at least 10% post-consumer recycled material.

Содержание 106018561

















Отзывы: