McIntosh MX122 Скачать руководство пользователя страница 37

Страница: 37 / 48

Zone 3

Press the Z3 ON/OFF Push-button to switch Zone 3

On or Off.

Remote Control Zone Operation

Using the Remote Control press the ZONE SELECT

Push-button and the Remote Control LCD Display

will indicate "MAIN"; press the Push-button again

for "ZONE2". Then press the POWER push-button to

activate Zone 2. Use the INPUT ▼ (Down) and ▲

(Up) Push-buttons to select the desired listening/view

ing source. To switch OFF Zone 2 press the ZONE

SELECT Push-button to select "ZONE2" followed by

pressing the POWER Push-button.

Note: The operation of Zone 3 is similar to Zone 2,

except Zone 3 is Audio only.

Dimmer

Repeated pressing of the Front Panel Dimmer Push-

button will reduce the brightness of the Front Panel

Information Display. There are two additional reduced

brightness settings and the ability to switch the display

Off.

Sleep

Press the SLEEP Push-button repeatedly to step

through the Sleep Settings in increments of 10 minutes

up to a maximum of 120 minutes, at which time the

MX122 will switch Off.

Pure Direct

Press the PURE Push-button on the Remote Control

to bypass the internal processing circuitry when

not needed. An example could be when the analog

audio output from a CD Player is connected to the

MX122 and the CD player is playing a stereo CD

disc. The settings include AUTO (default setting, the

MX122 chooses the best signal processing), DIRECT

(bypasses Back Surround and Front Height Channel

processing) and PURE DIRECT (bypasses all digital

processing).

Note: When switching between the three modes, the

sound is momentarily muted.

5. The menu item selected in step 4 was "Playlists",

now select from the various "Playlists" Menu

Items. Refer to figure 30.

6. The iPod is now playing the selected music.

Refer to figure 31. The icons listed at the bottom

of the On-Screen indicate how to Pause Playback,

Select Next or Previous, etc. using the MX122

Remote Control Direction Push-buttons.

7. By pressing the "Option" Push-button on the

Remote Control, the "Option menu" will appear

On-Screen providing additional playback choices.

Refer to figure 32.

iPod

Playback

Connect the iPod to the MX122 Rear Panel iPod/USB

Connector using the cable supplied with the iPod/

iPhone. To playback music from the iPod through the

MX122 perform the following steps:

1. Press the iPod/USB Push-button on the Remote

Control. Refer to figure 23 on page 35.

2. Press the OPTION

Push-button, select

“iPod Browse Mode”

from the On-Screen

"Option" Menu and

then press the ENTER

Push-Button. Refer to

figure 27.

3. Referring to figure 28,

select "On-Screen" and

then press the ENTER

Push-Button.

4. Select from the On-Screen iPod List, one of the

available choices. Refer to figure 29.

Figure 27

Figure 28

Figure 32

Figure 31

Figure 30

Figure 29

Содержание MX122

















































Результаты поиска

Содержание MX122

Отзывы:

Похожие инструкции для MX122

Бренды по названию

Популярные бренды

McIntosh MX122, Руководство пользователя

Результаты поиска

Содержание MX122

Отзывы:

Похожие инструкции для MX122

Бренды по названию

Популярные бренды