McIntosh MX122 Скачать руководство пользователя страница 2

Страница: 2 / 48

FCC Information (For US Customers)

1. IMPORTANT NOTICE: DO NOT MODIFY

THIS

PRODUCT

This product, when installed as indicated in the instruc-

tions contained in this manual, meets FCC requirements.

Modification not expressly approved by McIntosh may

void your authority, granted by the FCC, to use the

product.

2. CAUTION:

• To comply with FCC RF exposure compliance require

ment, separation distance of at least 20cm must be

maintained between this product and all persons.

• This product and its antenna must not be co-located or oper

ating in conjunction with any other antenna or transmitter.

3. COMPLIANCE INFORMATION:

• Product Name: A/V Processor

• Model Number: MX122

• This product contains FCC ID:ZQO-CY92024C:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, NY 13903

Tel. (607) 723-3512

IC Information (For Canadian Customers)

1. PRODUCT:

This product contains IC: 2581A-CY92024C

his product complies with RSS-210 of Industry Cana

da. Operation is subject to the following two conditions:

(1) this product may not cause harmful interference,

and (2) this product must accept any interference re

ceived, including interference that may cause undesired

operation. This Class B digital apparatus complies with

Canadian ICES-003.

2. CAUTION:

To reduce potential radio interference to other users, the

antenna type and its gain should be so chosen that the

equivalent isotropically radiated power (e.i.r.p.) is not

more than that permitted for successful communication.

Informations sur IC (pour les clients Canadiens)

1. APPAREIL:

Cet appareil contiens IC: 2581A-CY92024C

Cet appareil est conforme à la norme CNR-210 du

Canada. L’utilisation de ce dispositif est autorisée

seulement aux deux conditions suivantes : (1) il ne

doit pas produire de brouillage, et (2) l’utilisateur du

dispositif doit être prêt à accepter tout brouillage radi

oélectrique reçu, même si ce brouillage est susceptible

de compromettre le fonctionnement du dispositif. Cet

appareil numérique de la classe B est conforme à la

norme NMB-003 du Canada.

2. ATTENTION:

Afin de réduire le risque d’interférence aux autres

utilisateurs, il faut choisir le type d’antenne et son gain de

façon à ce que la puissance isotrope rayonnée

équivalente (p.i.r.e.) ne soit pas supérieure au niveau req

uis

pour l’obtention d’une communication satisfaisante.

Canadian Customers: CAN ICES-3 (B)/NMB-3 (B)

RF Exposure Information

This equipment complies with FCC/IC radiation expo

sure limits set forth for an uncontrolled environment and

meets the FCC radio frequency (RF) Exposure Guidelines

in Supplement C to OET65 and RSS-102 of the IC radio

frequency (RF) Exposure rules. This equipment has very

low levels of RF energy that are deemed to comply without

testing of specific absorption ratio (SAR).

Cet équipement est conforme aux normes d’exposition

aux radiations FCC/IC définies pour un environnement

non contrôlé et satisfait les directives d’exposition à la

radiofréquence (RF) dans le supplément C des OET65

et RSS-102 des règles d’exposition à la fréquence radio

(RF) IC. Cet équipement a de très faibles niveaux

d’énergie RF qui sont jugés conformes sans test de taux

d’absorption spécifique (SAR).

R&TTE(EN) Information

1. DECLARATION OF CONFORMITY

Our products follow the provisions of EC/EU directives:

LV: 2006/95/EC

EMC: 2004/108/EC

RoHS: 2011/65/EU

ErP: EC regulation 1275/2008 and its frame work

directive 2009/125/EC

R&TTE Directive 1999/5/EC.

2. IMPORTANT NOTICE: DO NOT MODIFY

THIS PRODUCT

This product, when installed as indicated in the instruc-

tions contained in this manual, meets R&TTE directive

requirements. Modification of the product could result

in hazardous Radio and EMC radiation.

3. CAUTION:

Separation distance of at least 20cm must be main

tained between this product and all persons.

This product and its antenna must not be co-located

or operating in conjunction with any other antenna or

transmitter.

Important Safety Information is supplied in a separate document “Important Additional Operation Information Guide

”

Содержание MX122

















































Результаты поиска

Содержание MX122

Отзывы:

Похожие инструкции для MX122

Бренды по названию

Популярные бренды

McIntosh MX122, Руководство пользователя

Результаты поиска

Содержание MX122

Отзывы:

Похожие инструкции для MX122

Бренды по названию

Популярные бренды