McIntosh MX122 Скачать руководство пользователя страница 27

Страница: 27 / 48

4. Press the Front Panel Up



Push-button to select

disabling the Front Panel IR Sensor

. Refer to

figure S7.

5. Then press the

ENTER Push-button to activate

the change. The MX122 will now switch power

Off to activate the change.

To re-activate the MX122 Front Panel Sensor

perform steps 1 through 3, in step four select "RC

LOCK

Off " followed by the ENTER Push-button.

Front Panel Information Display will now indi

cated the second menu option (the Front Panel is

not LOCKed Off).

Refer to figure S3.

3. Press the Down



Directional Push-button three

more times. Figures S4, S5 will momentarily

appear, followed by the desired menu option to

switch Off the Front Panel IR Sensor. Refer to

figure S6.

The MX122 has a Front Panel IR Sensor along with

provisions for connecting an external sensor. With

both sensors in the same room, possible interference

can occur between the signals. To prevent possible

operational problems it maybe necessary to disable

the MX122 Front Panel Sensor. Perform the

following steps to disable the sensor:

1. With the MX122 in STANDBY MODE press

and hold down the Front Panel ENTER and

RETURN Push-buttons while pressing the

STANDBY/ON Push-button. When the MX122

Front Panel Nomenclature is illuminained,

release the three Push-buttons. The MX122 Front

Panel Information Display will now indicate the

current status of the Front Panel/Volume Control.

Refer to figures S1 and S2.

Note: On the Front Panel Display the asterisk

symbol

ahead of the words

and

Off

indicates the active status of the Front

panel, Volume Control or the IR Sensor.

2. Press the Down



Directional Push-button and the

Setup Mode, con't

IR Sensor Setting



FP/VOL LOCK On

FP LOCK On

Figure S2

Figure S3

FP/VOL LOCK On



FP LOCK On

Figure S4

FP LOCK On



FP LOCK *Off

Figure S5

FP LOCK *Off



RC LOCK On

Figure S1

RC LOCK On



RC LOCK *Off

Figure S6



RC LOCK On

RC LOCK *Off

Figure S7

Содержание MX122

















































Результаты поиска

Содержание MX122

Отзывы:

Похожие инструкции для MX122

Бренды по названию

Популярные бренды

McIntosh MX122, Руководство пользователя

Результаты поиска

Содержание MX122

Отзывы:

Похожие инструкции для MX122

Бренды по названию

Популярные бренды