3UREOHP
3RVVLEOHFDXVH
6ROXWLRQ
Loss of traction drive/
slowing of drive speed
Loss of snow discharge or
slowing of snow discharge
The belt slips.
Adjust the cable. Adjust the belt.
The belt is worn.
Check / replace the belt. Adjust the
pulley.
The belt is off the pulley.
Check / reinstall the belt. Adjust the
pulley.
The chute deflector is clogged.
Clean the chute deflector.
Foreign objects clog the augers.
Remove the debris or the foreign ob-
ject from the augers.
The shear pin is broken.
Replace the broken shear pin.
Excessive snow and ice build up in between
track components.
Remove snow and ice build up from
in between track components.
The friction drive wheel is worn.
Contact an authorized service center.
The friction disc is wet
Let the friction disc dry
Failure of auger rotation
after the grip is released
The drive belt is not aligned.
Adjust the drive belt.
The discharge deflector is not aligned.
Adjust the discharge deflector.
The lights are not on (if so
equipped)
The engine is not running.
Start the engine.
The cable connection is loose.
Check the cable connections at the
engine and the lights.
The LED is burnt out.
Replace the LED light module. Indi-
vidual LEDs can not be replaced.
The chute rotator is diffi-
cult to move
There is debris in the chute rotator mechanism. Clean the internal parts of the chute
rotator mechanism.
The cables are kinked or damaged.
Make sure that the cables are not
kinked. Replace the cables that are
damaged.
The product turns to one
side
The tire pressure is not equal.
Adjust the tire pressure and fill the
tire.
The product drives with only one wheel.
Inspect the tire lock pin.
Uneven sled adjustment.
Adjust the skid plates and the sledge.
Uneven skid plates adjustment.
Adjust the skid plates and the sledge.
7UDQVSRUWDWLRQVWRUDJHDQGGLVSRVDO
7UDQVSRUWDWLRQDQGVWRUDJH
• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel tank before you put the product in
storage for a long period of time. Discard the fuel at
an applicable disposal location
• Safely attach the product during transportation to
prevent damage and accidents.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the product in a dry and frost free area.
818 - 004 -
'LFKLDUD]LRQH&(GLFRQIRUPLW¢
&217(1872'(//$',&+,$5$=,21(',&21)250,7&(
Husqvarna AB, SE-561 82 Husqvarna, SVEZIA, dichiara
sotto la propria esclusiva responsabilità che il prodotto
indicato:
'HVFUL]LRQH
6SD]]DQHYH
Marchio
McCulloch
Piattaforma / Tipo / Modello
ST 76EP
Lotto
A partire dal numero di serie 2018 e successivi
è pienamente conforme alle seguenti norme e direttive
UE:
'LUHWWLYDQRUPD
'HVFUL]LRQH
2006/42/CE
"relativa alle macchine"
2014/30/UE
"sulla compatibilità elettromagnetica"
2000/14/CE; 2005/88/CE
"sul rumore esterno"
Le norme armonizzate e/o le specifiche tecniche
applicate sono le seguenti: EN ISO 12100, ISO 14982,
ISO 8437, ISO 3744, EN 1032
In conformità alla direttiva 2000/14/CE, Allegato V, i
valori per i livelli sonori dichiarati sono riportati nella
sezione Dati tecnici del presente manuale e nel
documento firmato Dichiarazione di conformità CE.
Lo spazzaneve fornito è conforme agli esemplari
sottoposti a omologazione.
818 - 004 -
