MCC MIIC-101, Руководство пользователя

Страница: 20 / 43

13
Remote Mode
Bus Simulation Mode
Selecting any other operating mode terminates View Data Mode.
In Remote Mode, the unit is controlled by a Host computer system via its
serial port. Bus traffic can be collected or uploaded to the Host system for
storage and further analysis.
Remote Mode is entered when the unit receives a Serial Command at its
serial port.
The monitor responds to a variety of Serial Commands including:
• Baud Rate Select
• ASCII or Binary Remote Upload Select
• Slave Address Select
• Dump Trace Buffer
• Remote Trace
• Help
For more information see the Application Program Interface section in this
guide.
Selecting any other operation mode terminates Remote Mode.
In Bus Simulation Mode, the monitor simulates I
2
C Bus traffic without a
bus connection. Emulation provides a learning and testing platform
without the need for a working bus.
Bus simulation is enabled by pressing the BUFFER-UP key on the unit’s
front panel during the power-up sequence. Once enabled, bus simulation
remains in effect until the next unit power-up cycle.