MCC MIIC-101, Руководство пользователя

Страница: 21 / 43

14
During Trace operations, bus simulation repetitively generates the
following three bus messages:
10234836536C36C36F500 - Start 02, W, A, “Hello”, Stop
10435736F37236C364500 - Start 04, W, A, “World”, Stop
2FF500 - Start FE, R, N, Stop
See ASCII Remote Select Serial command for details on ASCII format.
Bus simulation can also be enabled with the Bus Simulation Enable Serial
command. For more information see the Serial Command section in this
guide.
In remote mode, the monitor is controlled by a host computer via an
RS-232 serial communications port. In this mode, bus traffic can be
collected or uploaded to the Host system for storage and further analysis.
For remote mode operations, MCC offers Windows-based I
2
C Bus /
SMBus Analyzer software to provide remote control of the monitor. This
software, described below, can be purchased with the monitor in kit form
(#MIIC-101K), or the software can be separately purchased (#SMB-SW).
A customer may also develop custom software to meet special
processing requirements. Remote control is accomplished via a series of
ASCII text commands. A description of the monitor command set is
provided in Appendix C.
Remote Operation