MCC MIIC-101, Руководство пользователя

Страница: 36 / 43

29
Example: E<Enter> - Enable Simulation
Syntax: R
Description:
The Remote Trace command places the unit in POST-TRIG Trace Mode, and
sends all bus traffic to the serial port.
During a Remote Trace, data in temporarily buffered in the unit, then sent to the
serial port in the currently selected ASCII or Binary format. See the ASCII
Remote Select or Binary Remote Select commands for data format details.
Remote Trace terminates upon receiving a High-to-Low transition on the
External Trigger line or an Escape <Esc> character on the serial port.
Screen Pause <Ctrl-S> and Screen Resume <Ctrl-Q> are active.
Example: R<Enter> - Start Remote Trace
In the above example, bus messages are buffered and uploaded to the Host
system in the selected ASCII or Binary format. See the ASCII Remote Select or
Binary Remote Select commands for data format details.
Syntax: S(ALL | [Slave Address] )
Remote Trace
Select Address