MCC MIIC-101, Руководство пользователя

Страница: 32 / 43

25
1 - Start with Acknowledgment.
50 - Slave Address 50H.
3 - Data with Acknowledgment.
20 - Data 20H.
.
.
.
3 - Data with Acknowledgment.
23 - Data 23H.
5 - Stop.
00 - Always 00.
In the above example, a single bus message is uploaded to the Host system in
ASCII format during a Remote Trace.
Syntax: B
Description:
The Binary Remote Select command configures Remote Trace data to be sent to
the serial port in Binary format.
When Binary Remote is enabled, data is transferred in two-byte binary sets. The
first byte specifies the data type, and is followed by a slave address or data byte.
When executing a Remote Trace, data is sent to the serial port in the following
Binary format:
TATH...TH<CR><LF>
where:
T - Type
Binary Remote Select