MCC MIIC-101, Руководство пользователя

Страница: 24 / 43

17
1. From Program Manager double click on the I2C Bus_SMBus Analyzer
Program Group.
2. Double click on I2C Bus_SMBus Analyzer Program Item.
The I
2
C/SMBus Analyzer Software can display real-time or previously
recorded bus data. To display live data, select the COM port connected to
the Bus Monitor, then click on the Trace Button. To display previously
recorded log file data, click File|Load and select a raw I2C (*.i2c) log file.
Several sample log files are automatically installed in the software default
folder (sub-directory) during software installation.
Program Controls:
I
2
C/SMBus Analyzer Software program controls consists of onscreen
buttons, check boxes, grid controls, menu items, and dialog boxes. This
section describes these controls and explains how to use these controls
to capture and display bus message data.
Button Controls:
Trace - This button is available when the ModeSelect|Remote Trace
menu item is selected. Clicking this button puts the monitor into remote
trace mode, and will display real time data captured from the bus.
Message data is displayed according to the current slave addresses,
display options, and data protocol selected.
Dump - This button is available when the ModeSelect|Dump Buffer menu
item is selected. Clicking this button puts the monitor into dump mode,
and will display previously recorded data captured from the bus that is
held in the monitor’s internal buffer. Message data is displayed according
to the current slave addresses, display options, and data protocol
selected.