McAfee VIRUSSCAN 5.1, Руководство пользователя

Страница: 172 / 315

Using the VirusScan application
172 McAfee VirusScan
To scan a particular disk or folder on your system, click the
Select
drive or folder to scan button
, then:
a. Type in the text box provided the drive letter or the path to the
folder you want scanned, or click
Browse
to locate the scan
target on your computer.
Š
NOTE: You may not use Universal Naming Convention
(UNC) notation to specify a network disk as a scan target
for scheduled tasks. Doing so will result in an “Invalid
Path” error. You may use UNC notation to specify scan
targets for operations you run directly with the VirusScan
application.
b. Select the Include subfolders checkbox to have the VirusScan
application also look for viruses in any folders inside your scan
target.
Š
NOTE: Choosing Include subfolders causes the
application to scan only those files stored in the subfolders
themselves. The application will not scan files stored at
the root level of the folder you designate. To scan those
files, clear the
Include subfolders checkbox.
c. Click OK to close the dialog box.
• Change scan targets. Select one of the listed scan targets, then click
Edit to open the Edit Item to Scan dialog box (Figure 5-9).
Figure 5-11. Edit Scan Item dialog box
The dialog box appears with the existing scan target specified.
Choose or enter a new scan target, then click
OK
to close the dialog
box.
• Remove scan targets. Select one of the listed scan targets, then click
Remove
to delete it.