60
10. Commissioning
r) Fader Start Playback CD/USB
• Push the button FADER START RELAY (43) to activate this function.
• With fader start playback activated, the LED above the button is lit.
• Pushing the crossfader (44) to an end position will activate playback at the corresponding player and switch the
other player to pause.
• If the crossfader (44) is put in the other end position at the end of the track, playback of the other player starts
and the previously active player is switched to pause.
s) Switching Off
• Interrupt playback by pressing the PLAY/PAUSE button
X
||
(14).
• If required, press the EJECT button (1) of the respective drive and remove the CD.
• First, switch off the amplifier and then any connected audio sources.
• Then switch off the DJ station using the POWER switch (46).
11. Anti-Shock Memory
The device is equipped with a digital anti-shock memory. This reduces the risk of interruptions during CD playback
when the device is subjected to vibrations.
The anti-shock memory is loaded automatically when the audio data is read from CD. The device needs a few
seconds until the memory is full and it can work optimally.
The memory stores up to 40 seconds of music. The anti-shock memory continues to play the CD in case of blows
that would otherwise cause an interruption.
