53
10. Commissioning
b) Inserting a CD
• Press the EJECT button (1) of the desired drive and put a CD in the CD tray (24) with the printed side facing
upwards.
• Press the EJECT button (1) again. The CD tray (24) is closed again.
Do not insert any damaged CDs into the player. The high rotational speed may cause it to crack and
damage the device. Do not insert more than one CD.
Never obstruct the movement of the CD tray. Do not force the CD tray into the drive. This damages the
mechanism and leads to malfunctions.
• When a CD is inserted, the display (16) shows information about the CD for a short time.
• Then, the device automatically sets the CUE mark at the beginning of music in the first track on the CD and goes
into pause mode.
The CD cannot be ejected during CD playback. This makes sure that the playback is not interrupted
unintentionally. Before pushing the OPEN/CLOSE button (1), stop playback.
c) Selecting the Playback Source
Minimise the volume with the corresponding slider CH1/CH2 (42) before operating the input
selection switch. Due to the different levels of the respective playback sources, volume may
suddenly oversteer when switching between inputs otherwise.
Internal playback source
• Put the input selection switch (33) of the desired channel CH1 or CH2 to the position CD1 or CD2.
• Push the button SOURCE (29) to select the desired playback source CD or USB.
• The selected playback source is displayed via the LEDs CD (31) and USB (32).
External playback source
• Put the input selection switch (33) of the desired channel CH1 or CH2 to the position LINE1/PHONO1 or
LINE2/PHONO2.
