58
10. Commissioning
n) Programming a Track Order CD/USB
• Stop playback.
• Press the PGM button (5).
• Select the first track to be played with the buttons
|
WW
and
XX
|
(8).
• Push the button PGM (5) again and select the next track with the buttons
|
WW
and
XX
|
(8).
• Proceed as described above until all tracks have been programmed in the desired order.
• Push the button
X
||
(14) to play back the track sequence.
o) Synchronisation of the Playback Speed CD/USB
To mix or cross-fade two signal sources cleanly, the beats have to be synchronised in many cases.
This can be achieved in three ways:
• Using the PITCH slider (17). It allows you to permanently modify the speed. This function is used when two tracks
have two completely different tempos.
• Using buttons PITCH BEND +/- (22 and 23). This allows you to change the speed temporarily. This function is
used when two tracks have the same beat but the starting point has to be synchronised.
• Using the touch wheel (12). By turning the wheel, you can change the speed temporarily. The speed change
depends on how quickly the touch wheel is turned. This function can also be used when two tracks have the same
beat but the starting point has to be synchronised.
PITCH slider
• Activate the slider PITCH (17) by pushing the button PITCH (21) until the LED next to the button lights up.
• Select the control range by briefly pushing the button PITCH (21). The selected control range (4/8/16%) is shown
in the display (16).
• Modify playback speed by moving the PITCH slide control (17) up or down. The percentage of the speed change
is shown in the display (16). Put the slide control in centre position for original speed.
