- 21 -
GB
E) Replacing the oven door lock and handle
- Turn the locking devices of the internal glass (Fig.11 Pos. C).
- Open the internal glass (Fig.11 Pos. D)
- Loosen the fastening screws (Fig.11 Pos. A)
- Remove the protections of the lock (Fig.11 Pos. B).
- Remove the lock unit (Fig.12 Pos. A)
- Loosen the nuts (Fig.12 Pos. B) of the handle and remove it by pulling it out of the door.
- Replace the damaged components and reassemble by proceeding in reverse order with the aforementioned operations.
D) Oven door gasket
- Take the gasket (Fig.9 Pos. A) out of its seat.
- Clean the seat of the gasket of all trace of dirt.
- Place the new gasket (Fig.9 Pos. A) in its seat (Fig.9 Pos. B), seal the 4 corners with a silicone-based mastic.
E)Cleaning solenoid valve filters
- Remove the rear panel.
- Remove the water supply pipe (Fig.10 Pos. A).
- Take out the filter (Fig.10 Pos. B) and wash it thoroughly.
- Fit it all back together.
Fig.10
A
B
Fig.9
A
B
D
C
B
A
Fig.11
Fig.12
A
B
