MECHANICAL
01-10–62
Water Inlet Pipe Assembly Note
Caution
•
Do not apply oil (such as engine oil, ATF) to the O-ring of the water inlet pipe. Otherwise, the O-
ring could swell causing a seal malfunction.
1. Clean away the sealant adhering to the bolt hole on the cylinder block side of the water inlet pipe stay.
2. Apply engine coolant to the O-ring.
3. Install the O-ring to the water inlet pipe.
4. Insert the water inlet pipe into the water pump being careful not to damage the O-ring.
5. Install the water inlet pipe gasket with the gasket
projection facing the direction shown in the figure.
6. Tighten the bolts in the order shown in the figure.
R
PROJECTION
bpe2ue00000065
12—16 N·m
{123—163 kgf·cm,
107—141 in·lbf}
STAY
WATER INLET PIPE
WATER OUTLET
1
N·m {kgf·m, ft·lbf}
20—26
{2.1—2.6,
15—19}
bpe5ue00000008
1A36-1U-12L.book 62 ページ ２０１２年１２月１０日 月曜日 午前９時２５分
