Mazda 2004 RX-8, Особенности сервиса

Страница: 532 / 540

CONTROL SYSTEM
09–40–2
CAN SYSTEM DESCRIPTION
CHU094055430S04
Mechanism of CAN System-Related Module
•
A CAN system-related module is composed of an electrical circuit, CPU, and input/output interface.
•
The size of the module has been reduced due to the elimination of the bulky, superfluous, input/output interface
in the conventional type of electrical module.
•
The CPU (multiplex block) controls all signals exchanged on the CAN harness.
•
Communication with non-multiplex parts is carried out by conventional input/output interface.
•
The functions of each component are shown below.
Twisted Pair
•
The multichannel uses two spirally twisted wires
called a twisted pair, and each wire, CAN_L and
CAN_H, has its own special function.
•
Both bus lines are opposite phase voltage. This
allows for minimal noise being emitted and makes
it difficult for noise interference to be received.
Component Function
Electrical circuit Supplies power to CPU and vicinity, and to input/output interface.
CPU
Computation processing block Control function has been expanded, and when transmission is necessary,
transmitted data is stored in a multiplex block. If a multiplex block receives a
request to read stored data, transmitted data is read from the multiplex block.
Multiplex block Transmits data received from bus line to computation processing block. In
addition, sends transmitted data stored from computation processing block to
bus line.
Input/Output interface Electrically converts information signals from switches to, be input to CPU,
and signals output from CPU for operating actuator or indicator lights.
INPUT
SIGNAL
INPUT
INTERFACE
INPUT
INTERFACE OUTPUT
INTERFACE
OUTPUT
INTERFACE
OUTPUT
SIGNAL
CONVENTIONAL
WIRING HARNESS
CAN HARNESS
(TWISTED PAIR)
CONNECTOR
CONNECTOR
MULTIPLEX
BLOCK
CPU
CONVENTIONAL MODULE
COMPUTATION
PROCESSING BLOCK
CAN SYSTEM-RELATED MODULE
CPU
A6A8111T003
CAN_L
CAN_H
B6U0940S003