Mazda 2004 RX-8, Особенности сервиса

Страница: 71 / 540

INTAKE-AIR SYSTEM
01–13–6
THROTTLE BODY FUNCTION
CHU011313640S01
•
An electronic throttle valve has been adopted
which opens and closes the throttle valve with the
actuator according to a signal from the PCM. It
enables precise intake air control at all engine
speed ranges.
End Of Sie
THROTTLE BODY CONSTRUCTION/OPERATION
CHU011313640S02
Construction
•
The throttle body construction is as shown in the
figure.
Operation
•
The actuator is driven by a duty signal from the PCM. This driving force is transmitted to the actuator gear,
middle gear, and valve gear, and the throttle valve opens.
•
Conversely, to close the throttle valve, the actuator is reversed by an opposite signal from the PCM, and the
throttle valve closes.
•
The throttle valve opening angle is input to the PCM by the TP sensor.
•
The throttle valve body has a control spring. If a malfunction occurs and the actuator cannot be controlled, the
throttle valve is maintained balanced at an opening angle of 5
°
by the spring. Due to this, the required amount
of air for vehicle operation is ensured.
End Of Sie
INTAKE MANIFOLD FUNCTION
CHU011313100S01
•
Integrates the SSV, VDI valve, and APV (13B-MSP (High Power)) which are switched according to the engine
speed and fuel amount required by the engine. Due to this, torque and output in all driving ranges are
improved.
End Of Sie
THROTTLE BODY
THROTTLE VALVE
ACTUATOR
CHU0113S007
THROTTLE BODY
THROTTLE
VALVE
ACTUATOR
ACTUATOR GEAR
MIDDLE GEAR
THROTTLE POSITION
SENSOR
SPRING
VALVE GEAR
CHU0113S008