Mazda 2004 RX-8, Особенности сервиса

Страница: 170 / 540

CONTROL SYSTEM
01–40–51
01–40
REAR HEATED OXYGEN SENSOR (HO2S) FUNCTION
CHU014018860S03
•
Detects the oxygen concentration in the exhaust gas.
•
A heater has been adopted, allowing stable detection of the oxygen concentration even when the exhaust gas
temperature is low.
End Of Sie
REAR HEATED OXYGEN SENSOR (HO2S) CONSTRUCTION/OPERATION
CHU014018860S04
•
Installed on the catalytic converter.
•
A heater is built into the sensor to facilitate the
activation of the HO2S at engine startup (when
the exhaust gas temperature is low).
•
A zirconium element is used on the sensor. When
there is a difference between the oxygen
concentration inside and outside the element,
electromotive force is generated by the
movement of oxygen ions (inside of the zirconium
element: atmosphere, outside: exhaust gas). The
electromotive force changes significantly at the
boundary of the stoichiometric air/fuel ratio (A/
F=14.7). The PCM receives the voltage
generated from the HO2S directly, and increases
or decreases the fuel injection amount by the fuel injection control so that it is close to the stoichiometric air/fuel
ratio.
•
When the temperature of the zirconium element is low, electromotive force is not generated. Therefore the
HO2S is heated by a built-in heater, facilitating the oxygen sensor activation. Due to this, the sensor is
efficiently activated even immediately after cold-engine startup, and a stable sensor output can be obtained.
End Of Sie
BAROMETRIC PRESSURE (BARO) SENSOR FUNCTION
CHU014018210S01
•
Detects the BARO.
End Of Sie
REAR HO2S
CHU0140S063
14.7
LOW
HIGH
OUTPUT
VOLTAGE
RICH LEAN
AIR/FUEL
RATIO
CHU0140S075