Mazda 0000-8F-N02B, Руководство по установке

Страница: 24 / 26

24
4280159 Rev. A 10/10
SERVICE PART NUMBER LIST
25
Part Number Description
0000-8F-H03 Hood Safety Switch Kit Service Part
0000-8F-H05A Mazda Immobilizer Interface Service Part
0000-8F-M21 Mazda CX-7/CX-9 DNA Card Software Service Part
0000-8F-N18A Mazda CX-9 Remote Start Wire Harness Service Part
0000-8F-Z01 Remote Start Control Module Service Part
0000-8F-Z02 Mazda 1-Button Remote Start Transmitter Service Part
0000-8F-Z03 Emergency Override/Programming Button Service Part
0000-8F-Z10 Dipole Antenna Service Part
0000-8F-Z12 Underhood Warning Label Service Part
PowerCode®, IT-s®, Real Panic Sound® and Progressive Find® are registered trademarks of Code Systems, Inc.
The hood safety switch will need to be adjusted to shut down the vehicle when the engine hood is raised to the full upright
position.
1. Raise and prop the vehicle’s engine hood.
2. The hood switch cylinder should be bend away from the hood to approximately 15 degrees above parallel with the
ground. (FIGURE CCC)
3. After the adjustment has been made, verify that remote engine start does not engage when the vehicle’s engine
hood is open.
4. If the remote engine start engages with the engine hood in the full upright position, the switch will need to be bent closer
to the engine hood.
24
NOTE: IT IS VERY IMPORTANT TO VERIFY THAT THE HOOD
SAFETY SWITCH PREVENTS THE REMOTE ENGINE START
SYSTEM FROM ENGAGING WHEN THE VEHICLE’S ENGINE
HOOD IS IN THE FULL UPRIGHT POSITION
FIGURE CCC
HOOD SAFETY SWITCH ADJUSTMENT