Mazda 0000-8F-N02B, Руководство по установке

Страница: 15 / 26

15
4280159 Rev. A 10/10
DOOR LOCK CONNECTION
1. Locate the 30-pin WHITE connector at the Body Control Module
mounted in the left kick panel area. (FIGURE RR)
2. Using a razor knife carefully cut back 1”-2” of the electrical tape
to expose the wiring. ( CAUTION: BE EXTREMELY CARE-
FUL NOT TO DAMAGE ANY OF THE WIRES.)
3. Using (1) supplied IDC wire tap, connect the wires listed below
and crimp the IDC wire tap in place using pliers. Ensure that a
complete and secure connection is made. Refer to FIGURE RR
& SS for proper connector and pin location.
30-pin
VEHICLE’S DOME LIGHT WIRE REMOTE START HARNESS WIRE
YELLOW/RED YELLOW/RED
1. Locate the 6-pin WHITE connector at the Body Control Module
mounted in the left kick panel area. (FIGURE PP)
2. Using a razor knife carefully cut back 1”-2” of the electrical tape
to expose the wiring. ( CAUTION: BE EXTREMELY CARE-
FUL NOT TO DAMAGE ANY OF THE WIRES.)
3. Using (1) supplied IDC wire tap, connect the wires listed below
and crimp the IDC wire tap in place using pliers. Ensure that a
complete and secure connection is made. Refer to FIGURE
PP & QQ for proper connector and pin location.
WIRE HARNESS CONNECTIONS - DRIVER’S KICK PANEL, continued
DOME LIGHT CONNECTION
12
VIEW FROM HARNESS SIDE
VEHICLE’S DOOR LOCK WIRE REMOTE START HARNESS WIRE
VIOLET/WHITE VIOLET/WHITE
FIGURE QQ
VIEW FROM HARNESS SIDE
FIGURE SS
NOTE: Refer to Page 2 for IDC Wire Tap Procedure and Wire color code information.
NOTE: Refer to Page 2 for IDC Wire Tap Procedure and Wire color code information.
!
!
V/W
* * *
3AB
3AB 3AA 3X 3U 3R 3O 3L 3I 3F 3C
3W 3T 3Q 3N 3K 3H 3E 3B
3AY
3AZ
3AC
3Z 3V 3S 3P 3J 3G
3A 3D
6-pin
FIGURE RR
FIGURE PP
Y/R
4E
4A