MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Руководство оператора

Страница: 61 / 319

61
Audio - Front Cabin
Radio operation
The frequency will change by the tun-
ing increments for the respective
waveband each time the button is
pressed, or continually for as long as
the button is pressed and held.
Manual tuning is deactivated if no
button is pressed for approx.
3 seconds.
Tuning via direct frequency input
Entry example:
98.5 MHz in FM waveband
Switch to the FM waveband
(
page 57).
Press

.
The frequency input display appears.
The frequency range of the FM wave-
band is shown.
Press the number buttons in
succession:

,

, and

.
Each number entered appears in the
display.
The system tunes to the frequency
entered
(
in this example: 98.5 Mhz).
The FM main menu appears after a
brief delay.
Within the AM waveband, the input is
restricted to frequencies within the re-
spective frequency increment (10 kHz).
i
FM waveband:
Tuning increments 0.2 MHz
AM waveband:
Tuning increments 10 kHz
Manual tuning is also possible in all
wavebands by pressing

or

.
The frequency will change by the tun-
ing increments for the respective
waveband each time one of the but-
tons is pressed.
Frequency increments for manual
tuning:
FM 0.2 MHz
AM 10 kHz
i
Entries outside the frequency range
are not possible.
i
The system selects the nearest valid
frequency if a frequency outside the
frequency increment is entered.