17
Installation
Passive / Active Cooling
With the new Cree XLamp® XM-L chip, higher efficiency
means less power is consumed and the Mazarra runs cooler
than its predecessors. Together with an ingenious
aerodynamic design, the Mazarra is passively cooled when
warm air passes through its aluminum chassis.
Nonetheless, in the situation where you do need to actively
cool your LED Module, for example, your Mazarra is installed
in a confined space such as a canopy, you can install the
optional fan by following the below instructions.
Note
The fan is temperature controlled, it will only turn on when the temperature rises above a
preset value (see Operating Instructions on the LED Module and Controller Unit). Installing the
optional fan will ensure the module runs at optimal temperature and prolong the lifespan of
LED Bulbs.
Installing the Optional Fan
1.
Insert the fan onto the slot as indicated by the diagram below, and
connect the power cable.
