29
Operating Instructions
Controller Function – Automatic Mode
The Controller Unit can be setup to automatically run programs to control photoperiod and
brightness of the system throughout the entire day.
1.
Press
Mode Switch Button
on the Controller to enter Selection Mode.
The arrow displayed on the LCD Panel will now flash.
2.
Rotate
Control Dial
clockwise to select
Automatic Mode
.
3.
Press
Confirm Button
to enter
Automatic Mode
.
You are now in the Automatic Mode.
4.
Press
Mode Switch Button
to switch between Preset,
Program 1 (P1) and Program 2 (P2).
To setup Program 1 and 2, please refer to “Setting up User-Defined
Programs” section.
5.
Press and
hold
Control Dial
for 3 seconds to modify
the settings.
6.
The
Automatic Mode Status Indicator
will now blink.
7.
Press and
hold
Control Dial
for 3 seconds to confirm settings.
The settings are now saved. The settings will also be saved if the Controller Unit was left
idle for 30 seconds.
The Preset photoperiod program cannot be changed and will automatically control the
brightness of the system following the pattern demonstrated in the diagram below.
8:
00
am
9:
00
am
10
:0
0a
m
12
:0
0pm
2:
00
pm
4:
00
pm
6:
00
pm
8:
00
pm
10
:0
0pm
0%
50%
100%
Channel A
Channel B
Channel C
Channel D
