28
Operating Instructions
Controller Function – Manual Mode
There are a total of 4 LED channels on each connected LED Module, the Controller Unit allows
you to manually turn them on, off and adjust their brightness.
1.
Press
Mode Switch Button
on the Controller to enter Selection Mode.
The arrow displayed on the LCD Panel will now flash.
2.
Rotate
Control Dial
clockwise to select
Manual Mode
.
3.
Press
Confirm Button
to enter
Manual Mode
.
You are now in the Manual Mode.
4.
Press and
hold
Control Dial
for 3 seconds to modify the settings.
5.
The
Manual Mode Status Indicator
will now blink.
6.
Press the following buttons to turn on or turn off the corresponding LED
channel.
Backlight Button
Channel A
Exit Button
Channel B
Mode Switch Button
Channel C
Confirm Button
Channel D
7.
To adjust brightness of the selected channel, rotate
Control Dial
.
Rotate clockwise will increase the brightness and vice versa.
8.
Press
Control Dial
to advance to the next LED channel, and repeat
#6 until the desired brightness of all 4 LED channels is set.
9.
Press and
hold
Control Dial
for 3 seconds to confirm settings.
The settings are now saved. The settings will also be saved if the Controller Unit was left
idle for 30 seconds.
