18
Maintenance
Changing / Replacing LED Bulbs
The Mazarra is the only LED Lighting System available on the market that offers both
plug-and-play LED bulb replacement design and LED bulbs covering the entire color spectrum,
allowing maximum customization and flexibility.
By mix-and-matching colored LED bulbs, Mazarra allows you to pick the right color spectrum
for your aquarium, and bring out that color from your corals exactly like you have always
dreamed of.
WARNING
: Install only Maxspect™ LED Bulbs onto Mazarra LED Modules. Installing
unauthorized or aftermarket LED Bulbs onto Mazarra LED Modules will void your warranty!!
WARNING
: Prior to installing LED Bulbs, you must ensure you are using the correct wattage
and driving current for the LED Bulb. Using a wrong wattage and/or driving current could
shorten the lifespan of bulb or even damage it!!
1.
Open the LED Module the same way as you would replace Optics.
Please refer to “Installing / Changing Optics” section for detail instructions.
2.
Carefully loosen and remove the screws, then lift the clasp holding the
LED Bulb chip to replace it.
3.
When finished, return the clasp to its original position and tighten the
screws.
