MAXIDRY MAXI200, Руководство по установке

Страница: 9 / 78

113261 - 1 5
WARNING:
DO NOT use heat for drying articles that contain plastic, foam, sponge rubber, or
similarly textured rubber materials. Drying in a heated tumbler may damage plastics or
rubber and may be a fire hazard.
7. A program
should be
established for the inspection and cleaning of lint in the burner area, exhaust ductwork, and
inside the dryer. The frequency of inspection and cleaning can best be determined from experience at each
location.
WARNING:
The collection of lint in the burner area and exhaust ductwork can create a potential fire
hazard.
8. For personal safety, the dryer
must be
electrically grounded in accordance with local codes and/or the National
Electrical Code ANSI/NFPA NO. 70-LATEST EDITION or in Canada, the Canadian Electrical Codes Parts 1 &
2 CSA C22.1-1990 or LATEST EDITION.
NOTE:
Failure to do so will VOID THE WARRANTY.
9.
UNDER NO CIRCUMSTANCES should the door switch or the heat circuit devices ever be disabled
.
WARNING: PERSONAL INJURY OR FIRE COULD RESULT .
10. This dryer is not to be used in the presence of dry cleaning solvents or fumes.
11. Remove articles from the dryer as soon as the drying cycle has been completed.
WARNING:
Articles left in the dryer after the drying and cooling cycles have been completed can
create a fire hazard.
12. DO NOT operate steam dryers with more than 125 psi (8.61 bar) steam pressure. Excessive steam pressure can
damage steam coil and/or harm personnel.
13. Replace leaking flexible hoses or other steam fixtures immediately. DO NOT operate the dryer with leaking
flexible hoses. PERSONAL INJURY MAY RESULT .
14.
READ AND FOLLOW ALL CAUTION AND DIRECTION LABELS ATTACHED TO THE DRYER
.
15. For safety, proper operation, and optimum performance, the dryer must not be operated with a load less than
sixty-six percent (66%), 132 lb (59.8 kg) of its rated capacity.
WARNING: YOU MUST DISCONNECT AND LOCKOUT THE ELECTRIC SUPPLY AND
THE GAS SUPPLY OR THE STEAM SUPPLY BEFORE ANY COVERS OR
GUARDS ARE REMOVED FROM THE MACHINE TO ALLOW ACCESS FOR
CLEANING, ADJUSTING, INSTALLATION, OR TESTING OF ANY
EQUIPMENT PER OCCUPATIONAL SAFETY AND HEALTH
ADMINISTRATION (OSHA) STANDARDS
.