MAXIDRY MAXI200, Руководство по установке

Страница: 64 / 78

60 113261 - 1
MONTHLY
Empty the compressed air filter bowl.
EVERY 3 MONTHS
Clean lint accumulation from the gas valve/burner area at the top of the dryer, the fan (impellor) motor, and the
fan/impellor bearings located in the dryer base.
NOTE: To prevent damage, avoid cleaning and/or touching ignitor/flame-probe assembly.
EVERY 6 MONTHS
Check fan (impellor) and drive motor V-belts for tightness and wear. Retighten and replace if required.
STEAM MODELS
– Clean the steam coil fins. We suggest using compressed air and a vacuum cleaner with brush
attachment.
NOTE:
When cleaning steam coil fins, be careful not to bend the fins. If fins are bent, straighten by using a
fin comb, which is available from local air-conditioning supply houses.
Inspect and remove lint accumulation in customer furnished exhaust ductwork system and from dryer’s internal exhaust
ducting.
CAUTION: THE ACCUMULATION OF LINT IN THE EXHAUST DUCTWORK CAN
CREATE A POTENTIAL FIRE HAZARD
.
NOTE: DO NOT
OBSTRUCT THE FLOW OF COMBUSTION AND VENTILATION AIR.
CHECK CUSTOMER FURNISHED BACK DRAFT DAMPERS IN THE EXHAUST
DUCTWORK. INSPECT AND REMOVE ANY LINT ACCUMULATION, WHICH CAN
CAUSE THE DAMPER TO BIND OR STICK.
NOTE:
When cleaning the dryer cabinet(s), avoiding using harsh abrasives. A product intended for the
cleaning of appliances is recommended.