MAXIDRY MAXI200, Руководство по установке

Страница: 75 / 78

113261 - 1 71
WARNING:
If the water in the supply line or water solenoid valve freezes, the S.A.F.E. system
will
be INOPERATIVE!!
The manual ball cock shutoff valve must be located outside of the dryer at a distance from the dryer where it is easily
accessible.
3. Electrical Requirements
No independent external power source or supply connection is necessary. The 24 volt power to operate the
S.A.F.E. system is accomplished internally in the dryer (from the dryer controls).
WARNING:
Electrical power must be provided to the dryer at
ALL
times. If the main electrical
power supply to the dryer is disconnected, the S.A.F.E. system is INOPERATIVE!!
NOTE: S.A.F.E. system water solenoid valve test can be performed by pressing the “STOP” key and
“A” key together.
OPTIONAL MANUAL BYPASS
Provisions are made in the dryer’s S.A.F.E. system for the installation of an optional manual bypass. Depending on
the model dryer, the connections for the manual bypass are made at the “T” or “four way” fitting located in the outlet
supply side of the water solenoid valve. The use and connections of this manual bypass are at the option or discretion
of the owner.
The water connection for the manual bypass is made to the “T” or “four way” fitting, which has a 3/8” F.P.T. and a
coupling
must be
used to provide the minimum 1/2” supply (feed) line.
If the rear area of the dryer or the water supply is located in an area where it will be exposed to cold/freezing temperatures,
provisions
must be made to protect these water lines from freezing.