MAXIDRY MAXI200, Руководство по установке

Страница: 69 / 78

113261 - 1 65
E. STEAM DAMPER ACTUATOR SYSTEM
The system consists of a hinged damper plate, pneumatic piston, and a 24 volt solenoid valve with a needle valve to
control the speed of the piston actuation.
On a call for heat, a 24 volt signal is applied to the 3-way/2-position solenoid valve. This signal switches the valve so
that compressed air is sent to the piston. The piston rod extends, pushing the hinged steam damper plate to the open
position. This allows room air to be drawn through the hot steam coil and then through the tumbler.
When the temperature set point has been reached, the 24 volt signal is removed from the solenoid valve, so that the
solenoid valve blocks the air supply to the piston, and the air in the piston is bled to the atmosphere. The spring in the
piston now retracts the piston rod, closing the steam damper. The steam damper plate now covers the steam coil and
allows room air to bypass the coil before entering the tumbler for a rapid cool down.
The steam damper plate should open and close slowly and smoothly. The speed can be modulated by adjusting the
needle valve knob. Turning the knob clockwise (CW) restricts the compressed airflow and slows down the steam
damper movement. Counterclockwise (CCW) adjustment speeds up the steam damper motion. Upon completion of
adjustment, tighten the needle valve’s locking nut.
NOTE: Turning knob on flow control clockwise (CW) will restrict airflow. Turning knob
counterclockwise (CCW) will allow higher airflow.