MAXIDRY MAXI200, Руководство по установке

Страница: 74 / 78

70 113261 - 1
If the rear area of the dryer, or the water supply is located in an area where it will be exposed to cold/freezing
temperatures, provisions
must be
made to protect these water lines from freezing.
WARNING: If the water in the supply line or water solenoid valve freezes, the S.A.F.E. system will
be
INOPERATIVE!!
IMPORTANT: Appliance is to be connected to the water mains using a new hose set and the old hose
set
should not be
reused.
2. Water Connections:
The water connection is made to the 3/4” F.P.T. bushing of the electric water solenoid valve located at the rear
upper left area of the dryer. The water solenoid valve has a 1/2” M.P.T. connection and a 1/2” bushing is supplied
to provide the minimum 1/2” supply (feed) line. Flexible supply line/coupling
must be
used in effort to avoid
damage to electric water solenoid valve.
WARNING: Water must be supplied to the S.A.F.E. system or dryer will not operate.
IMPORTANT:
Flexible supply line/coupling must be used. Solenoid valve failure due to hard
plumbing connections WILL VOID WARRANTY. It is recommended that a filter or
strainer be installed in the water supply line.
Typical water supply …