Forward-Facing
LATCH: Lower
Anchor Belt
+
Top
Tether
Install
continued on next page
Raise Headrest All the
Way Up
Undo All Headrest Pad
Fasteners
Lift Up Headrest Pad
to Reveal the Forward-
Facing Belt Path
Pull the torso pad flap to the
side as shown to locate the
Forward-Facing Belt Path
.
IMPORTANT!
DO NOT use the AutoLock
when installing
with LATCH: lower anchor belts.
Torso Position 1 or
2 Can Be Used
You may adjust to
Position 2
as your
child grows.
Flip Seat Pad Forward to
Reveal Lower Anchor Belt
Remove the lower anchor
belt and connectors from the
storage location.
OR
If the lower anchor belt
was used for Rear-Facing
installation,
remove it from
the
Rear-Facing Belt Path
.
47
48
1
2
3
4
DO NOT
use the lower anchors of the child restraint
anchorage system (LATCH system) to attach this child
restraint when restraining a child weighing more than
40 lb (18 kg).
Before you begin installing the car seat
into your vehicle, did you check:
Your child’s weight and height?
See page 39.
Your child’s fit?
See page 12.
WARNING:
