Changing Buckle Position
1
2
3
1
2
3
Fully Recline Car Seat
•
Place one hand on the back
of the car seat.
•
With your other hand,
squeeze the recline handle
and rotate the car seat until it
is fully reclined.
Unbuckle Harness
Fully Loosen Harness
Straps
Locate Buckle’s Metal
Retainer
The buckle’s metal retainer is
located in the opening below
the recline handle.
Push the harness adjustment
strap to the side to fully reveal
the metal retainer.
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
4
Changing Headrest/Harness Height
Changing Headrest/
Harness Height
Squeeze the headrest adjustment
handle.
Move the headrest up or down to the
proper height for your child.
Release the headrest adjustment handle
to lock the headrest in place.
Make sure the headrest is locked
securely in place.
To Fully Raise Headrest
You may need to raise the adjustable
torso into
Position 2
to access the
highest headrest position. See page 18.
Then squeeze the headrest adjustment
handle and move the headrest all the way
up.
You can then adjust the torso back into
Position 1
if desired.
See page 18 or the vehicle install section you will be using for
more information about torso position use.
continued on next page
14
For
Rear-Facing Child Fit
,
see page 11.
For
Forward-Facing
Child Fit
,
see page 12.
Check your child’s fit often.
If you cannot achieve a snug harness fit for your child,
see page 16.
To learn how to check harness tightness,
see pages 53-55.
Check the harness straps often for any wear or damage.
13
Rotate Metal Retainer
and Push It Up Through
Buckle Slot in Car Seat
1
2
3
1
2
3
5
