For Use in
Rear-Facing Mode
or
Forward-Facing Mode
Spring Assist Out-of-the-Way
Buckle Cover
To remove,
slide the buckle cover off the
buckle. Pull it out of the seat pad.
To install,
slide the buckle cover over the
buckle and into the buckle slot in the seat
pad.
NOTE:
The buckle cover only goes through
the slot in the pad and
NOT
through the
buckle slot in the car seat. It lays flat
underneath the pad as shown.
For Use in All Modes
Removable Cup Holders
(on select models)
The cup holders are top-rack
dishwasher safe.
To remove,
twist the cup holder
counterclockwise. Pull it out of the slot
in the car seat.
To install,
align the tabs on the bottom
of the cup holder with the slots in the
car seat. Twist clockwise to lock in
place.
Only For Use in
Rear-Facing Mode
Head & Back Pillow
The head and back pillow MUST be
used together.
To remove head pillow,
pull it out from
behind the back pillow.
To remove back pillow,
loosen the
harness straps and slide it out from
behind the harness straps.
5
6
