Maxell MP-WU9101B, Руководство пользователя

Страница: 6 / 296

English-
4
English-
4
Warning, Notices, and Safety Instructions
Warning, Notices, and Safety Instructions
Notice
This product is intended for the adults who have the ability to operate this machine.
Write down your projector model number and serial number to keep the information for maintenance
purposes in the future. If the projector is lost or stolen, the information could also be used for the
police report.
Model number:
Serial number:
Contents of package
Check the following accessories that come with the projector. If you find any missing accessory,
contact your dealer immediately.
1. AC Power Cord 4. AA battery (x2) 7. RGB cable
2. Wired Remote Cable 5. Printed Manual 8. Mount cap
3. Remote control 6. RS232 cable(cross)
Do not open
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with an arrowhead within a triangle
is intended to tell the user that inside this product
may cause risk of electrical shock to persons.
The exclamation point within a triangle is intended to tell
the user that important operating and/or servicing instructions
are included in the technical documentation for this equipment.
CAUTION / TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
About Electro-Magnetic Interference
This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
This product may cause interference if used in residential areas. Such use must be avoided unless
the user takes special measures to reduce electromagnetic emissions to prevent interference to the
reception of radio and television broadcasts.
In Canada
CAN ICES-3(A) / NMB-3(A)
Description pertaining to FCC Rules Part 15
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.