Maxell MP-WU9101B, Руководство пользователя

Страница: 30 / 296

English-
28
Installation of the Projector
English-
28
RGB connection
Connect PC or other devices with RGB output to the COMPUTER IN1 input.
12V OUTPUT
(OPTION)
Connect RGB (R/B/G/H/V) or component (YPbPr) source to COMPUTER IN2 inputs.
12V OUTPUT
(OPTION)
HDBaseT / LAN connection
HDBaseT is a technology to transmit image signal using a LAN cable.
LAN Connection - When this connector to be the LAN (RJ-45) function only, connect it to computer
or Hub. Enter the correct IP Address or the computer host name which is the same as the projector's
host name. Then you can control the projector by remote through the Internet.
Video Signal - When this connector to be the video signal input, connect it to a device with HDBaseT
output (such as high-definition TV source, Blu-ray Player....etc).
Use a LAN cable of up to 100m long. If the cable is longer than that, the image may be deteriorated
and a failure of LAN transmission may occur.
LAN
IN OUT
SDI
COMPUTER IN 2
REMOTE
CONTROL HDBaseT HDMI 1 DVI-D HDMI 2
CONTROL V H B/Cb/Pb G/Y R/Cr/Pr COMPUTER IN 1
LAN - PC or Hub
Video - Device with HDBaseT output (such as high-definition TV source, Blu-ray Player....etc).
12V OUTPUT
(OPTION)
Desktop or laptop
computer
Desktop or laptop
computer