Maxell MP-WU9101B, Руководство пользователя

Страница: 21 / 296

English-
19
Projector parts and functions
English-
19
Effective range of remote control signal
The illustration below shows effective range of remote control signal. (When new batteries are used.)
3 0°
3 0°
7
m
Note: Do not put the remote control at places with high temperature or humidity as it could cause the remote control to
malfunction.
Note: If the effective range of remote control signal reception decreases or if the remote control stops working, replace
the batteries.
Note: If the remote sensor is exposed to fluorescent lamp or strong sunlight, the remote control may not operate normally.
Installing batteries in the remote control
Note: Always handle the batteries with care and use them only as directed.
Improper use may result in battery explosion, cracking or leakage, which could result in fire, injury and/or
pollution of the surrounding.
Note: Keep a battery away from children and pets.
Note: Do not recharge, short circuit, solder or disassemble a battery.
Note: Be sure to insert the batteries in the right direction according to the polarity.
Note: Do not mix new battery with used ones. Otherwise, it would shorten the life of new batteries or cause leakage.
Note: Use AA batteies as instructed; do not insert different types of batteries into the remote control.
Note: If you will not use the remote control for long periods of time, be sure to remove the batteries to prevent leakage,
which could damage the remote control.
Note: The liquid contents in the batteries is harmful to the skin; do not touch the leakage with your bare hands directly.
When installing new batteries, be sure to clean up the leakage thoroughly.
Note: Refer to the regulations enforced by your local government on the disposal of used batteries; improper disposal
could damage the environment.
1.
2.
Align and insert the two AA batteries according to their plus
and minus terminals as indicated in the remote control.
(Use the appropriate AA carbon-zinc or alkaline batteries
(non-rechargeable) in accordance with laws and regulations.)
3. Put the battery cover back to the former state.
Remove the battery cover.
(approx.)