i-SHWAK V4
Inverter air/water chillers and heat pumps with wall-mounted indoor unit and remote condensing outdoor unit
5
The manual of i-SHWAK V4 units collects all the necessary information for the better use of the equipment under safety conditions
for the operator thus meeting the requirements listed in the 2006/42/CE Equipment Directive and following amendments.
1
PURPOSES AND CONTENTS OF THE MANUAL
This manual provides basic information as for the selection, installation, operation and maintenance of i-SHWAK V4 units. It is
addressed to the installer and the user of the unit: it allows operating this equipment efficiently, even if the user does not have
any previous specific knowledge of it.
This manual describes the characteristics of the equipment when it was being put on the market; therefore, it may not capture
later technological improvements introduced by the company as part of its constant endeavour to enhance the performance,
ergonomics, safety and functionality.
The company introduces also technological improvements and is not constrained to update the manuals for previous versions of
appliances that could not be compatible. So make sure to use, for the installed unit, the supplied manual.
It’s recommended that, the user must follow the instructions contained in this booklet, especially those concerning the safet
y and
routine maintenance.
1.1
CONSERVATION OF THE MANUAL
The manual has to be always kept with the unit it refers to. It has to be stored in a safe place, away from the dust and moisture. It
has to be accessible to all users who shall consult it any time they are in doubt on how to operate the equipment.
The company reserves the right to modify its products and related manuals without necessarily updating previous versions of the
reference material. It declines also any responsibility for possible inaccuracies in the manual if due to printing or transcription
errors.
The customer shall store any updated copy of the manual or parts of it delivered by the manufacturer as an attachment to this
manual.
The company is available to give any detailed information about this manual and to give information regarding the use and the
maintenance of its own units.
1.2
GRAPHIC SYMBOLS
Indicates operations that can be dangerous for people and/or disrupts the correct operation of the equipment.
Indicates prohibited operations.
Indicates important information that the operator has to follow in order to guarantee the correct operation of the
equipment in complete safety. It indicates also general notes.
2
SAFETY LAWS
The i-SHWAK V4 units have been designed in compliance with the following Directives and Harmonised Norms:
x
2006/42/CE, 2014/35/UE, 2014/30/UE, 2011/65/UE, 2012/19/UE Community Directives
x
UNI EN 378-1, 378-2, UNI EN 12735-1 Norms
x
CEI EN 60335-2-40 Norm
x
CEI EN 55014-1, CEI EN 55014-2, CEI EN 61000-3-2, CEI EN 61000-3-3, CEI EN 62233 Norms
And the following directives and regulations concerning the energy labeling and the eco-friendly products:
x
Community directive 2009/125/CE and subsequent transpositions
x
Community directive 2010/30/UE and subsequent transpositions
x
Regulation UE No 811/2013
x
Regulation UE No 813/2013
3
PERMITTED USES
x
The company excludes any contractual and extra-contractual liabilities for damages caused to persons, animals or objects, by
incorrect installation, setting and maintenance, improper use of the equipment, and the partial or superficial reading of the
information contained in this manual.
x
These units have been designed only for heating and/or cooling water. Any other use not expressly authorized by the
manufacturer is considered improper and therefore not allowed.
x
The location of the plant, the hydraulic and electrical circuits must be established by the planting designer and must take into
account both technical requirements as well as any applicable local laws and authorized specifications.
x
The execution of all works must be performed by skilled and qualified personnel and competent in the existing rules in the
country in which the appliance will be installed.
