i-SHWAK V4
Inverter air/water chillers and heat pumps with wall-mounted indoor unit and remote condensing outdoor unit
13
FIELD/VARIANTS TABLE
The filed “CT”
describes the size of the coupled outdoor and indoor units.
The field AE describes the electric power supply of the indoor unit and of the eventual auxiliary electric heater (Accessory RE).
The remaining fields (K3V, ACS, GI, RE) describe the factory fitted accessories and should be requested at the time of the order.
The variant 0 of the fields K3V, GI, RE describes the standard configuration of each size and model.
Example: the code of the standard configuration (without accessories) of the model MPR1 of 06 kW is obtained as below:
0110917#(CT1)(AE)(K3V)(
ACS)(GI)(RE)00(MC) → 0110917#(16)(0)(0)(1)(0)(00)00(XX) → 0110917#1600100000XX.
Since this model is a single-phase one and equipped with rapid DHW producer, you have to set AE to be 0 and DHW to be1.
Refer to the following table (e.g. i-SHWAK V4 06 and 16 models)for the codes of the standard configuration of the various models
(for selecting the accessories, just set the corresponding variant to the desired value according to the TABLE FIELDS/ VARIANTS
described above):
Indoor unit
Model
Description
Standard configuration code
V4 06
MP1
Single-phase wall mounted unit
0110917#1600000000XX
MPR1
Single-phase wall mounted unit with rapid producer of DHW
0110917#1600100000XX
MP3
Three-phase wall mounted unit
0110917#1610000000XX
MPR3
Three-phase wall mounted unit with rapid producer of DHW
0110917#1610100000XX
V4 16
MP1
Single-phase wall mounted unit
0110917#2100000000XX
MPR1
Single-phase wall mounted unit with rapid producer of DHW
0110917#2100100000XX
MP3
Three-phase wall mounted unit
0110917#2110000000XX
MPR3
Three-phase wall mounted unit with rapid producer of DHW
0110917#2110100000XX
For more clarification, in the following table are shown the values only of the fields which identify the different models of the
indoor units, and factory-fitted accessories that are selectable by setting the appropriate variant to the desired value (in
accordance with TABLE FIELDS/VARIANTS shown above):
Indoor unit
Model
Description
CT
AE
ACS
Selectable
accessories
V4 06
MP1
Single-phase wall mounted unit
16
0
0
K3V, GI, RE
MPR1
Single-phase wall mounted unit with rapid producer of DHW
16
0
1
K3V, GI, RE
MP3
Three-phase wall mounted unit
16
1
0
K3V, GI, RE
MPR3
Three-phase wall mounted unit with rapid producer of DHW
16
1
1
K3V, GI, RE
V4 16
MP1
Single-phase wall mounted unit
21
0
0
K3V, GI, RE
MPR1
Single-phase wall mounted unit with rapid producer of DHW
21
0
1
K3V, GI, RE
MP3
Three-phase wall mounted unit
21
1
0
K3V, GI, RE
MPR3
Three-phase wall mounted unit with rapid producer of DHW
21
1
1
K3V, GI, RE
Fieldo
Variant
Description
CT
16 ÷21
Nominal heating capacity of the unit.
AE
0
Single-phase power supply.
1
Three-phase power supply.
K3V
0
Unit not equipped with the 3 way kit.
1
Unit equipped with the 3 way kit (known as VDIS1), for the commutation between plant/DHW technical side.
ACS
0
Unit not equipped with DHW kit.
1
Unit equipped with the kit of instantaneous production of DHW. The indoor units provided with the DHW kit have a width
greater than those without it.
GI
0
Unit not equipped with plant managing module.
1
The GI additional module implements some useful
functions for managing the plant, such as: the mixer’s
controller logic for
plant side in heating and cooling operations, controller logic for DHW technical side, controller logic for solar integration.
Controller logic for relaunching (secondary) circulator plant side on plant side.
RE
00
Without electric heater.
02
Single or three-phase electric heater of 2 kW for plant integration installed on the inner collector of the unit. If the kit VDIS1 is
present, it is common to the both plant and DHW technical sides. It is managed in integration mode and/or substitution.
Double safety level thermostats with automatic and manual reset for protecting the plant and the user.
03
Electric heater of 3 kW with the same characteristics as the one described in the variant 01 of the field RE.
04
Electric heater of 4.5 kW with the same characteristics as the one described in the variant 01 of the field RE.
31
E-heater of 1,5 kW
with the technical characteristics similar to those described in the variant 01 of the field “RE”, available
only as single phase electric power version.
