below:
•
Batch connection operations
– To perform several connection operations all at the same time: make the
desired connection changes to the
Work Matrix
, leaving all others as “No Change”, and then apply the
changes to the
Active Routing
target by selecting it from the “Select target” drop down and clicking the
Save
button.
•
Store Active Routing matrix state to a Preset
– The entire
Active Routing
matrix state can be stored
to a Preset by first loading it to the
Work Matrix
, followed by selecting the desired target Preset and
clicking the
Save
button.
•
Editing an existing Preset
– Editing a Preset is done by loading it to the
Work Matrix
, making the
desired changes and saving it back to the same Preset. All this is accomplished without changing the
Active Routing
matrix state.
3.4 Labels Tab
Figure 3 shows the Labels Tab. Click on a field or use the tab key to step between fields. Label names are
Page 26 of 75
©
2013 Matrix Switch Corporation
www.matrix-switch.tv
Figure 17: Labels Tab