Matrix Switch Corporation MSC-GCP2U32 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 75

Matrix Switch Corporation MSC-GCP2U32 Скачать руководство пользователя страница 10

In the event that the device's IP address is unknown, refer to the

Unknown IP Address

troubleshooting section.

Refer to the

Network Planning

section for assistance with developing a network plan for multi-device

applications.

1.4.3 Matrix Routing

The Routing tab of the Web Page Interface provides a convenient way to view and change the matrix routing
state and is the default page shown.
A preset can also be recalled from this interface, by selecting one from the Load Preset drop down control.
Refer to the

Routing Tab

section for more details.

1.4.4 Labels

Labels can be assigned to video (and audio if applicable) sources and destinations. Labels can also be assigned
to presets. Labels can be up to 8 characters in length. The default source labels use “Src” as a prefix, and the
destination labels use “Dest” as a prefix (example: Src1). The presets are labeled “Startup” for Preset 0 and
“PresetN”, where N is a number from 1 to 9, for the remaining presets.
The Labels Tab on the Web Page Interface can be used for modifying labels. Click the Save button to store any
changes that are made. Refer the

Labels Tab

section for more details.

1.4.5 Presets

There are 10 stored matrix routing presets. Preset 0 is recalled on power up and by default routes source 1 to all
destinations. All other presets default to “No Change” for all destinations, which when recalled will have no
effect. Presets can assign a partial subset of destinations or all destinations as desired.
Presets can be modified on the Presets Tab of the Web Page Interface. Refer to the

Presets Tab

section for more

details.

1.4.6 Panel Remote Router IP Address

Remote panels control Matrix Switch Corporation video/audio routers with the TCP/IP protocol via the Ethernet
port.

NOTE:

The MSC-GCP2U32 LCD panel offers advanced Virtual Routing capabilities and has the ability to

control multiple routers via profiles. Refer to the

Virtual Routing

section for more details.

The

Remote Router IP

setting on the Config Tab of the Web Page Interface defines the IP address of the

remote router which the panel interface will control. This defaults to 192.168.2.60 on remote panels, which is
the default IP address of Matrix Switch Corporation routers.
After changing the

Remote Router IP

setting click the

Save

button to store the changes, which take effect

immediately (a reboot is not required).
Refer to the

Config Tab - Button Panel Settings

section for more details on configuring the Remote Router IP

Page 10 of 75

©

2013 Matrix Switch Corporation

www.matrix-switch.tv

«
...
8
9
10
11
12
...
»

Содержание MSC-GCP2U32












































































Отзывы:

Нет отзывов