profile.
Note:
Configuring the available router control
profiles on the MSC-GCP2U32 currently
requires using the Mascot
MtxProfiles
Command
.
To select the current active router control profile
navigate to the
Matrix Profile
page from the
Config Menu
. The names of the available
router control profiles will be listed as in Figure
13. Navigate to the desired profile and press
Select
to activate it. The interface will return to the default
Routing
page and the new profile name will be
shown on the right side of the status bar.
The
M1-M4
buttons are also configured by default to select one of the first 4 profiles. Refer to the Mascot
Macros Command
for more details.
2.8 Reboot
The
Reboot
dialog (Figure 14) can be accessed
from the Main Menu, General Config and
Network Config pages.
The
Left
and
Right
arrows can be used to
navigate between the
Reboot
and
Cancel
options. Pressing the
Select
button on the
Reboot
option will reboot the system after a
short delay and the
Cancel
option will return the
interface to the Routing page. The
Cancel
button can also be utilized to cancel the reboot.
Page 22 of 75
©
2013 Matrix Switch Corporation
www.matrix-switch.tv
Figure 13: Matrix Profile
Figure 14: Reboot