Matco Tools FixAdvisor MD70, Руководство по эксплуатации

Страница: 57 / 104

Using the FixAdvisor
™
I/M READINESS TESTING
MD70 55
„ To erase OEM enhanced, ABS or SRS DTCs: Press the
SYSTEM MENU button to display the System menu. Use
the UP and DOWN buttons, as necessary, to highlight
the desired option, then press the ENTER button. Perform
the appropriate Code Retrieval procedure (see page 42 for more
information) and then proceed to step 3.
3. Press and release the ERASE button. A confirmation message
shows on the display.
„ If you are sure you want to proceed,
use the
UP and DOWN buttons,
as necessary, to highlight Yes , then
press the ENTER button to
continue.
„ If you do not want to proceed, use the
UP and DOWN buttons, as
necessary, to highlight No , then press
the ENTER button to cancel the
erase procedure.
4. If you chose to erase DTCs, a progress screen displays while the
erase function is in progress.
„
If the erase was successful, a
confirmation message shows on the
display. Press the
POWER/LINK
button to return to the DTC screen.
„
If the erase was not successful, an
advisory message shows on the
display.
Erasing DTCs does not fix the problem(s) that caused the code(s)
to be set. If proper repairs to correct the problem that caused the
code(s) to be set are not made, the code(s) will appear again (and
the check engine light will illuminate) as soon as the vehicle is
driven long enough for its Monitors to complete their testing.
I/M READINESS TESTING
I/M is an Inspection and Maintenance program legislated by the
Government to meet federal clean-air standards.
The program requires that a vehicle be taken periodically to an
Emissions Station for an "Emissions Test" or "Smog Check,” where the
emissions-related components and systems are inspected and tested
for proper operation. Emissions Tests are generally performed once a
year, or once every two years.