Matco Tools FixAdvisor MD70, Руководство по эксплуатации

Страница: 43 / 104

Using the FixAdvisor
™
CODE RETRIEVAL PROCEDURE
MD70 41
A . A PENDING CODE IS PRESENT – If
the yellow LED is illuminated, it may
indicate a Pending code is present.
Check the FixAdvisor’s display for
confirmation. A Pending code is con-
firmed by the presence of a numeric
code and the word PENDING on the
Scan Tool’s display.
B . MONITOR NOT RUN STATUS – If
the FixAdvisor’s display shows a zero
(indicating there are no DTC’s present
in the vehicle’s computer memory),
but the yellow LED is illuminated, it
may be an indication that some of the
Monitors supported by the vehicle
have not yet run and completed their
diagnostic testing. Check the
FixAdvisor’s display for confirmation.
All Monitor icons that are
blinking
have not yet run and completed their
diagnostic testing; all Monitor icons
that are
solid have run and
completed their diagnostic testing.
„ Red LED – Indicates there is a prob-
lem with one or more of the vehicle’s
systems. The red LED is also used to
indicate that DTC(s) are present (dis-
played on the FixAdvisor’s screen). In
this case, the Malfunction Indicator
(Check Engine) lamp on the vehicle’s
instrument panel will be illuminated.
- If the correct manufacturer is shown,
use the UP and DOWN
buttons, as necessary, to highlight
Yes , then press the ENTER
button to continue.
- If the correct manufacturer is not
shown, use the UP and DOWN
buttons, as necessary, to
highlight No , then press the ENTER
button to return to the list of vehicle manufacturers.
If the manufacturer for your vehicle is not listed, use the UP
and DOWN buttons, as necessary, to select Other
manufacturer and press the ENTER button for additional
DTC information.
If the definition for the currently
displayed code is not available, an
advisory message shows on the
Scan Tool’s LCD display.
A c u ra
Yo u h ave s e l e c t e d :
I s t h i s c o r r e c t ?
Ye s
N o