Matco Tools FixAdvisor MD70, Руководство по эксплуатации

Страница: 50 / 104

Using the FixAdvisor
™
VIEWING OEM ENHANCED DTCs
48 MD70
„ The upper right hand corner of the
display shows the number of the code
currently being displayed, the total
number of codes retrieved.
„ The Diagnostic Trouble Code (DTC)
and related code definition are shown
in the lower section of the LCD display.
I/M MONITOR STATUS icons
are not displayed when
viewing enhanced DTCs.
In the case of long code definitions, a small arrow is
shown in the upper/lower right-hand corner of the code
display area to indicate the presence of additional
information. Use the
and buttons, as necessary,
to view the additional information.
„ The FixAdvisor will display a code only
if codes are present in the vehicle’s
computer memory. If no codes are
present, a “No Enhanced DTC’s are
presently stored in the vehicle’s
computer” is displayed. Press the
SYSTEM button to return to the
System Menu.
3. If more than one code was retrieved press the DTC/FF
button, as
necessary, to display additional codes one at a time.
„
Whenever the Scroll function is used to view additional codes,
the FixAdvisor’s communication link with the vehicle’s computer
disconnects. To re-establish communication, press the
POWER/LINK button again.
4. When the last retrieved DTC has been displayed and the DTC/FF
button is pressed, the FixAdvisor returns to the GM/Isuzu Enhanced
menu.
„
To view additional enhanced DTCs, repeat steps 1 through 4 ,
above.
„ To exit the enhanced mode, press the SYSTEM MENU
button. The Scan Tool returns to the System Menu.
Honda/Acura OEM Enhanced DTCs
When OEM Enhanced is selected from the
System Menu (and the manufacturer selected
during the code retrieval procedure was Honda
or Acura), the Honda/Acura Enhanced menu
displays. You may view either “ECM/PCM
DTCs” or “Transmission DTCs.”